How to do a trial run of the wood crusher?

How to do a trial run of the wood crusher?

A wood crusher is a kind of mechanical equipment that is widely used in the waste wood recycling process. Through the internal high-speed rotating cutter head and blades, various waste wood is processed, and this waste wood is processed by the wood shredder. Afterward, it can often be recycled reasonably. However, as a crushing type of mechanical equipment, we should not directly start production operations after we get it. Instead, we should go through a trial run to confirm that there is no problem before loading materials normally. Then How to do a trial run of the wood crusher?

First of all, when we operate the wood crusher for trial operation, we must first check whether the entire set of facilities of the wood crusher equipment is completely installed and neat, because some users use manual feeding, and some users use conveyor feeding, so if If it is manual feeding, it needs a professional number of operators to operate. If you are not skilled, you can watch the feeding method and skills, but it should be noted that the feeding personnel should not put their hands on the feeding of the wood crusher equipment. Near the mouth, to prevent damage caused by returning material, if the conveyor is used for feeding, then after we adjust it, we can directly load the material for trial operation; in the process of our trial operation, we must always pay attention to the wood crusher equipment See if there is any abnormality. If there is a problem, wait for the material residue inside the wood crusher to be completely removed before cutting off the power supply. Potential safety issues can also directly cut off the power supply to make the wood crusher static.